How to Guide

TECHNICAL DATA
AUTOMOTIVE MATTE FINISH
Rust-Oleum Corporation Form: GDH-607
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 052517
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
PHYSICAL PROPERTIES .
MATTE FINISH
Resin Type
Modified Alkyd
Pigment Type
Amorphous Silica, Carbon Black, Black Iron Oxide
MIR
0.95 Max
Fill Weight
12 ounces
Solvents
Acetone and Aromatic Hydrocarbons
Recommended Dry Film Thickness
(DFT) per Coat
1.0-2.0 mils
(25-50µ)
Practical Coverage at Recommended
DFT (assumes 15% material loss)
15 sq.ft./can
Dry Times at 70-80°F
(21-27°C) and 50%
Relative Humidity
Touch
20 minutes
Handle
1 hour
Fully Dry
24 hours
Shelf Life
5 years
Flash Point
-156ºF (-104ºC)
Safety Information
For additional information, see SDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The statements of this literature
do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use of our materials are beyond our control, we
can guarantee these products only to conform to our standards of quality, and our liability, if any, will be limited to replacement of defective materials. All
technical information is subject to change without notice.