How to Guide

TECHNICAL DATA
COUNTERTOP TRANSFORMATIONS
™
Rust-Oleum Corporation Form: GDH-64
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 051815
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
.PHYSICAL PROPERTIES .
BASE COAT
WETTING AGENT
TOP COAT
Resin Type
Acrylic
Surfactant
Modified silicone epoxy
Pigment Type
Various
NA
Clear
Solvents
Water
Water
n/a
Weight
Per Gallon
8.6-9.1 lbs.
8.4 lbs.
9.0 lbs.*
Per Liter
1.0-1.1 kg
1.0 kg
1.0 kg*
Solids
By Weight
33.5-36.0%
1.5%
98%*
By Volume
30.0-33.0%
1.0%
97%*
Volatile Organic Compounds
<250 g/l (2.08 lbs./gal.)
<250 g/l (2.08 lbs./gal.)
<250 g/l (2.08 lbs./gal.)*
Recommended Dry Film
(DFT) Per Coat
2.0-2.5 mils
(50-62.5µ)
NA
4.0-8.0 mils
(100-200µ)
Wet Film to Achieve DFT (unthinned
material)
6.0-7.5 mils
(150-187.5µ)
NA
4.0-8.0 mils
(100-200µ)
Practical Coverage at Recommended DFT
(assumes 15% material loss)
Small Kit – 30 sq.ft.
Large Kit – 50 sq.ft.
NA
Small Kit – 30 sq.ft.
Large Kit – 50 sq.ft.
Dry Times at 70-80°F
(21-27°C) and 50%
Relative Humidity
Touch
NA
NA
NA
Recoat
NA
NA
4-8 hours
Full Hardness
NA
NA
7-10 days
Dry Heat Resistance
200°F (93°C)
NA
200°F (93°C)
Shelf Life
2 years
NA
2 years
Flash Point
>210°F (99°C)
NA
>160°F (67°C)
Safety Information
COMBUSTIBLE LIQUID AND VAPOR. HARMFUL IF INHALED. MAY AFFECT
BRAIN OR NERVOUS SYSTEM CAUSING DIZZINESS, HEADACHE OR
NAUSEA. CAUSES RESPIRATORY TRACT, EYE AND SKIN IRRITATION. FOR
INDUSTRIAL OR COMMERCIAL USE ONLY. KEEP OUT OF REACH OF
CHILDREN.SEE THE PRODUCT MATERIAL SAFETY DATA SHEET (MSDS)
AND LABEL WARNINGS FOR ADDITIONAL SAFETY INFORMATION.
Safety Information
For additional information, see MSDS
* Activated material
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.