Specification Sheet

TECHNICAL DATA

ESH-09

EPOXYSHIELD

WATER-BASED EPOXY

GARAGE FLOOR COATING (CAN KITS)

Form: GDH-356

Rev.: 013018

If temperature is 60-70ºF (16-21ºC) Allow product to stand after mixing

Start brushing (trimming edges):

30 minutes after mixing

Start rolling:

45 minutes after mixing

Use all mixed product within (pot life):

2 hours after mixing

Best time to paint is mid-afternoon (after 1 PM) to ensure best curing conditions and maximum pot life

If temperature is 71-80°F (22-27ºC) Allow product to stand after mixing

Start brushing (trimming edges):

10 minutes after mixing

Start rolling:

15 minutes after mixing

Use all mixed product within (pot life):

1.5 hours after mixing

Best time to paint is early morning (before 9 AM) to ensure best curing conditions and maximum pot life

If temperature is 81-85º (27-29ºC) Allow product to stand after mixing

Start brushing (trimming edges):

Immediately after mixing

Start rolling:

5-15 minutes after mixing

Use all mixed product within (pot life):

1 hour after mixing

Best time to paint is early morning (before 9 AM) to ensure best curing conditions and maximum pot life