Technical Specifications

Rust-Oleum
®
Primer Sealer - Aerosol
DESCRIPTION A sprayable formula that prevents paint from soaking into a primed surface.
USES Apply Primer Sealer over a surface primed with a Rust-Oleum
®
Primer to prevent top
coats from soaking into the primer and to achieve an even, uniform finish.
APPEARANCE Available in Gray only.
SURFACE PREPARATION (See directions on can for more details)
For use over Rust-Oleum Primer only. Lightly sand glossy surfaces. Clean the surface
with Mineral Spirits to remove all oil, grease, wax and dirt then dry thoroughly.
MIXING Shake can vigorously for one minute after mixing ball begins to rattle. Shake the can
often during use.
APPLICATION Use outdoors or in a well-ventilated area such as an open garage. Use when
temperature is between 50°F (10°C) and 90°F (32°C) and humidity is below 85% to
ensure proper drying. Do not apply to surfaces that, when heated, exceed 200°F
(93°C) or galvanized metal. Avoid spraying in very windy, dusty conditions. Cover
surrounding area to protect from spray mist. Hold the can 12-16" from surface and
spray in a steady back-and-forth motion, slightly overlapping each stroke. Keep the can
the same distance from the surface. Keep the can in motion while spraying. Apply 2 or
more light coats a few minutes apart.