Technical Specifications
TECHNICAL DATA
PT2X-01
PAINTER’S TOUCH
®
2X ULTRA COVER ENAMEL SPRAYS
1
Form: GDH-1268
Rev.: 013019
DESCRIPTION AND USES
Rust-Oleum
®
Painter’s Touch
®
2X Ultra Cover contains
technology that provides twice the coverage on wood, metal,
most plastic, wicker and more when compared to other
matching colors of Rust-Oleum general purpose paints:
Painter’s Touch, SPRAY N GO, Quick Color and Touch ‘n
tone. It covers surfaces with less spray passes, allowing
projects to be completed faster and easier. Any angle spray
feature allows you to spray in any direction, even upside
down. Fast Drying.
TIP: Some plastics made of polyethylene such as plastic
storage containers are manufactured in a way that may
hinder maximum paint adhesion. Test paint in a hidden area
first.
PRODUCTS
SKU
DESCRIPTION (Aerosol)
249089
Gloss Winter Gray
249090
Gloss White
249091
Gloss Warm Yellow
249092
Gloss Sun Yellow
249093
Gloss Spa Blue
249094
Gloss Sage Green
249095
Gloss Real Orange
249097
Gloss Purple
249098
Gloss Navy Blue
249099
Gloss Navajo White
249100
Gloss Meadow Green
249102
Gloss Kona Brown
249103
Gloss Khaki
249104
Gloss Key Lime
249110
Gloss Ivory
249111
Gloss Hunter Green
249113
Gloss Grape
249114
Gloss Deep Blue
249115
Gloss Dark Gray
249116
Gloss Colonial Red
249119
Gloss Candy Pink
249120
Gloss Brilliant Blue
249122
Gloss Black
249123
Gloss Berry Pink
249124
Gloss Apple Red
249125
Gloss Almond
249847
Gloss Chestnut
249862
Gloss Marigold
249863
Gloss Cranberry
267116
Gloss Seaside
PRODUCTS (cont.)
SKU
DESCRIPTION (Aerosol)
283189
Gloss Coral
283190
Gloss Ocean Mist
299910
Gloss Golden Sunset
314751
Gloss Spring Green
329198
Gloss Pink Peony
329200
Gloss Modern Mint
342060
Gloss Solstice Blue
PRODUCT APPLICATION
Use outdoors or in a well ventilated area such as an open
garage. Use when temperature is between 50-90ºF (10-
32ºC) and humidity is below 65% to ensure proper drying.
Do not use on objects that may exceed 200ºF (93ºC) surface
temperature. Do not apply to galvanized steel. Avoid
spraying in very windy and dusty conditions. Cover
surrounding area to protect from spray mist.
SURFACE PREPARATION
Remove all dirt, grease, oil, salt and chemical contaminants
by washing the surface with a commercial detergent, or other
suitable cleaning method. Rinse with fresh water and allow
to thoroughly dry. Remove loose paint and rust with a wire
brush or sandpaper. Previously coated surfaces must be
sound and in good condition. Smooth, hard, or glossy
finishes should be scarified by sanding to create a surface
profile.
WARNING! If you scrape, sand or remove old paint from any
surface, you may release lead paint dust. LEAD IS TOXIC.
EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS
ILLNESS, SUCH AS BRAIN DAMAGE; ESPECIALLY IN
CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID
EXPOSURE. Wear a NIOSH approved respirator to control
lead exposure. Clean up carefully with a HEPA vacuum and
a wet mop. Before you start, find out how to protect yourself
and your family by contacting the National Lead Information
Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead.
PRIMING
Use of Painter’s Touch 2X Ultra Cover
®
primer provides
superior adhesion and hiding and is especially
recommended for bare wood and metal. The following
primers are recommended
249058
White Primer
249086
Red Primer
249088
Gray Primer
249846
Flat Black Primer