How to Guide

TECHNICAL DATA
PROFESSIONAL UNDERCOATING
Rust-Oleum Corporation Form: GDH-661
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 012215
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
.PHYSICAL PROPERTIES .
Physical Properties
PROFESSIONAL UNDERCOATING
Resin Type
Modified Alkyd
Pigment Type
Carbon Black
Solvents
Aromatic Hydrocarbons and Ketones
MIR
1.00 Max
Fill Weight
15 ounces
Recommended Dry Film
Thickness (DFT) Per Coat
1.0-1.5 mils
(25-37.5µ)
Practical Coverage at Recommended
DFT (assumes 15% material loss)
10-15 sq.ft./can
Dry Times at 70-80°F
(21-27°C) and 50%
Relative Humidity
Touch
1 hour
Recoat
Within 1 hour or after 24 hours
Full Cure
72 hours
Dry Heat Resistance
200°F (93°C)
Shelf Life
5 years
Flash Point
-156°F (-104°C)
Safety Information
For additional Information see MSDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.