Technical Specifications

TECHNICAL DATA
SPECIALTY MAGNETIC PRIMER
Rust-Oleum Corporation Form: GDH-312
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 030218
Vernon Hills, Illinois 60061 www.rustoleum.com
PHYSICAL PROPERTIES .
MAGNETIC PRIMER
Resin Type
Modified Alkyd
Pigment Type
Magnetite
Solvents
Mineral Spirits, Glycol Ether
Weight
Per Gallon
19.5 lbs.
Per Liter
2.34 kg
Solids
By Weight
82.1%
By Volume
46.1%
Volatile Organic Compound
<420 g/l (3.50 lbs./gal.)
Recommended Dry Film Thickness
(DFT) per Coat
4.0-5.0 mils
(100-125µ)
Wet Film to Achieve DFT (unthinned
material)
8.5-11.0 mils
(212.5-275µ)
Practical Coverage at Recommended
DFT (assumes 15% material loss)
39-48 sq.ft./quart (1 coat)
13-16 sq.ft./quart (3 coats)
Dry Times at 70-80°F
(21-27°C) and 50%
Relative Humidity
Touch
30 minutes
Handle
1 hour
Recoat
30 minutes
Shelf Life
5 years
Flash Point
>200°F (93°C)
Safety Information
For additional information, see SDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The statements of this literature
do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use of our materials are beyond our control, we
can guarantee these products only to conform to our standards of quality, and our liability, if any, will be limited to replacement of defective materials. All
technical information is subject to change without notice.