Technical Specifications

TECHNICAL DATA PRO-12
PROFESSIONAL
ACRYLIC LATEX BRUSH
.DESCRIPTION AND USES .
Rust-Oleum
®
Professional Acrylic Latex brush is designed to
provide long lasting protection and durability. This enamel offers
excellent coverage, chip resistance and color retention.
..PAINTING CONDITIONS .
Apply only when air and surface temperatures are above 50ºF (10ºC)
and 90ºF (32ºC) and humidity is below 85% to ensure proper drying.
..PRODUCT APPLICATION .
SURFACE PREPARATION
Remove all dirt, grease, oil, salt and chemical contaminants by
washing the surface with a commercial detergent, or other suitable
cleaning method. Rinse with fresh water and allow to thoroughly dry.
Remove loose paint and rust with a wire brush or sandpaper. Lightly
sand glossy surfaces. WARNING! If you scrape, sand, or remove old
paint, you may release lead dust. LEAD IS TOXIC. Contact the
U.S.EPA/Lead Information Hotline at 1-800-424-LEAD or log on to
www.epa.gov/lead.
APPLICATION
Before using, stir thoroughly to ensure any settled pigment is re-
dispersed. Thinning is not required. In hot, dry conditions, thin with
up to 2 ounces of water per quart to extend dry time. Avoid painting in
direct sunlight or on hot surfaces. Use a good quality synthetic brush.
Avoid excessive brushing as this will reduce film thickness and
protection. Use light even strokes to ensure smooth and uniform flow.
DRY & RECOAT TIMES
Dry and recoat times are based on 70ºF and 50% relative humidity.
Allow more time at cooler temperatures. Dries to touch in 30 minutes,
dry to handle in 1 hour, and fully dry in 2-4 hours. Primers may be top
coated after 2-4 hours.
CLEAN-UP
Clean brush and other application tools immediately with soap and
water.
1