Technical Specifications

TECHNICAL DATA
SPC-19
RUST-OLUEM
®
SPECIALTY
CHALKBOARD TINTBASE
Rust-Oleum Corporation
11 Hawthorn Parkway
Vernon Hills, Illinois 60061
Phone: 800∙481∙4785
www.rustoleum.com
Form: GDH-339
Rev.: 060221
PHYSICAL PROPERTIES
CHALKBOARD TINTBASES
Resin Type
Acrylic
Pigment Type
Titanium Dioxide, Nepheline Syenite
Solvents
Water, Glycol, Ester Alcohol
Weight
Per Gallon
10.6 lbs.
Per Liter
1.27 kg
Solids
By Weight
54.6%
By Volume
41.8%
Volatile Organic Compound
<250 g/l (2.08 lbs./gal.)
Recommended Dry Film Thickness
(DFT) per Coat
1.5-2.0 mils
(37.5-50µ)
Wet Film to Achieve DFT
(unthinned material)
3.5-5.0 mils
(87.5-125µ)
Practical Coverage at Recommended
DFT (assumes 15% material loss)
95-120 sq.ft./30 oz.
(based on actual application)
Dry Times at 70-80°F
(21-27°C) and 50%
Relative Humidity
Touch
30 minutes
Handle
2 hours
Recoat
4 hours
Shelf Life
5 years
Flash Point
>200°F (93°C)
Safety Information
For additional information, see SDS
Calculated values are shown and may vary from the actual manufactured material.
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.