How to Guide

TECHNICAL DATA
V2100 SYSTEM RUST REFORMER
®
Rust-Oleum Corporation Form: GDH-1032
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 012716
Vernon Hills, Illinois 60061 www.rustoleum.com/industrial
An RPM Company
PHYSICAL PROPERTIES .
RUST REFORMER
®
Resin Type
Modified Alkyd
Pigment Type
Corrosion Inhibitive Pigment, Magnesium Silicate, Carbon Black, Calcium Carbonate
Solvents
Acetone, Ethylbenzene, N-Butane, N-Butyl Acetate, Xylene
MIR
Maximum value of 1.2
Fill Weight
15 oz. (426 grams)
Recommended Dry Film
Thickness (DFT) Per Coat
1.0-2.0 mils (25-50µ)
Practical Coverage at Recommended
DFT (assumes 15% material loss)
Approximately 14 sq.ft./can (1.3 m
2
)
Dry Times at 70-80°F
(21-27°C) and 50%
Relative Humidity
Touch
6-12 minutes
Handle
1-2 hours
Top Coat
24 hours
Dry Heat Resistance
200°F (93°C)
Shelf Life
5 years
Warning!
THIS PRODUCT CONTAINS A CHEMICAL KNOWN TO THE STATE OF
CALIFORNIA TO CAUSE CANCER AND BIRTH DEFECTS OR OTHER
REPRODUCTIVE HARM. DANGER! EXTREMELY FLAMMABLE, MAY CAUSE
FLASH FIRE, CONTENTS UNDER PRESSURE, VAPOR HARMFUL, FOR
INDUSTRIAL OR COMMERCIAL USE ONLY. SEE THE PRODUCT MATERIAL
SAFETY DATA SHEET (MSDS) AND LABEL WARNINGS FOR ADDITIONAL
SAFETY INFORMATION.
Safety Information
For additional information, see SDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The statements of this literature
do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use of our materials are beyond our control, we
can guarantee these products only to conform to our standards of quality, and our liability, if any, will be limited to replacement of defective materials. All
technical information is subject to change without notice.