How to Guide

ManualsBrandsRust-Oleum ManualsSpray Paint215634

AEROSOLS TECHNICAL DATA RO-03

V2100 SYSTEM

RUST REFORMER

Form: GDH-1032

Rev.: 012716

.DESCRIPTION AND USES .

Rust-Oleum

High Performance Rust Reformer

is a specially

formulated coating containing a silane additive which is capable

of reacting with iron oxide in the rusted steel. Once reacted with

iron oxide, the desiccant action of the silane helps inhibits further

oxidation. Rust Reformer is for use on sound rusted steel

surfaces and is not intended for use on clean metal or galvanized

steel. The material dries to a hard black finish. A top coat is

optional.

.PRODUCTS .

215634 V2100 System Rust Reformer

PACKAGING .

15 fl. oz. container, 6 aerosols packed to a carton

OPTIONAL TOPCOAT .

V2100 System Enamel Aerosol

.PRODUCT APPLICATION .

SURFACE PREPARATION

Remove all dirt, grease, oil, salt and chemical

contaminants by washing the surface with Krud Kutter

Original Cleaner/Degreaser or other suitable cleaner. Mold

and mildew must be cleaned with a chlorinated cleaner or

bleach solution. Rinse with fresh water and allow to dry.

Hand tool (SSPC-SP-2) or power tool (SSPC-SP-3) clean

to remove loose rust to get to a sound rusted surface.

APPLICATION

Use when temperature is above 35°F (2°C) and humidity

is below 85% to ensure proper drying. The surface

temperature must be between 35-100°F (2-38°C). Use

reformer on rusted surfaces. Protect surrounding surfaces

from overspray. Overspray can carry a significant distance.

Shake can for one minute after mixing ball is heard. Hold

can 10-14 inches from surface. Apply several light passes

a few minutes apart to avoid drips and runs. A single coat

is sufficient for optimal performance.

NOTE: Do not use with V2116838 High Temperature

Aluminum or V2176838 High Temperature black.

CLEAN UP

Clean valve by turning can upside down and spray for 5

seconds. Clean-up wet paint with xylene or mineral spirits.

Properly discard empty container.

CLOGGING

If the valve clogs, twist and pull off spray tip and rinse in a

solvent such as xylene. Do not insert any object into can

valve opening.

Summary of content (2 pages)

PAGE 1
AEROSOLS TECHNICAL DATA RO-03 V2100 SYSTEM RUST REFORMER® .DESCRIPTION AND USES ® . .PRODUCT APPLICATION ® SURFACE PREPARATION Rust-Oleum High Performance Rust Reformer is a specially formulated coating containing a silane additive which is capable of reacting with iron oxide in the rusted steel. Once reacted with iron oxide, the desiccant action of the silane helps inhibits further oxidation.
PAGE 2
TECHNICAL DATA V2100 SYSTEM RUST REFORMER® PHYSICAL PROPERTIES . ® RUST REFORMER Resin Type Modified Alkyd Pigment Type Corrosion Inhibitive Pigment, Magnesium Silicate, Carbon Black, Calcium Carbonate Solvents Acetone, Ethylbenzene, N-Butane, N-Butyl Acetate, Xylene MIR Maximum value of 1.2 Fill Weight 15 oz. (426 grams) Recommended Dry Film Thickness (DFT) Per Coat 1.0-2.