Technical Specifications

TECHNICAL DATA
CONCRETE PATCH & REPAIR KIT
Rust-Oleum Corporation Form: TDS-1377
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 081517
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
. PHYSICAL PROPERTIES .
* Activated material
Calculated values are shown and may vary slightly from the actual manufactured material
CONCRETE PATCH & REPAIR KIT
Resin Type
Amine Cured Epoxy
Solvents
Benzyl Alcohol
Weight*
Per Gallon
13.3 lbs.
Per Liter
1.6 kg
Solids*
By Weight
100%
By Volume
100%
Volatile Organic Compounds*
0 g/l
Mixing Ratio
2:1 Base to Activator (by volume)
Induction Period
None
Practical Coverage at Recommended DFT
(assumes 15% material loss)
14 linear feet (4.25 m) • ½” joint (12.7 mm) • ½” depth (12.7 mm)
Pot Life @ 70-80°F (21-27°C) and 50%
Relative Humidity
20-30 minutes
Dry Times at 70-80°F
(21-27ºC) and 50%
Relative Humidity
Lt. Foot Traffic
8 hours
Recoat
8 hours
Shelf Life
5 years
Flash Point
>200°F (93°C)
Safety Information
For additional information, see SDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The statements of this literature
do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use of our materials are beyond our control, we
can guarantee these products only to conform to our standards of quality, and our liability, if any, will be limited to replacement of defective materials. All
technical information is subject to change without notice.