Technical Specifications

TECHNICAL DATA
SPECIALTY PLASTIC PRIMER QUART
Rust-Oleum Corporation Form: GDH-158
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 091817
Vernon Hills, Illinois 60061 www.rustoleum.com/specialty
An RPM Company
PHYSICAL PROPERTIES .
PLASTIC PRIMER
Resin Type
Modified Alkyd
Pigment Type
Titanium Dioxide
Solvents
Aromatic Hydrocarbons
Weight
Per Gallon
9.4 lbs.
Per Liter
1.13 kg
Solids
By Weight
57.5%
By Volume
41.8%
Volatile Organic Compound
<475 g/l (3.95 lbs./gal.)
Recommended Dry Film Thickness
(DFT) per Coat
1.0-2.0 mils
(25-50µ)
Wet Film to Achieve DFT (unthinned
material)
2.5-5.0 mils
(62.5-125µ)
Practical Coverage at Recommended
DFT (assumes 15% material loss)
75-140 sq.ft./quart
(7.0-13.0 m
2
/quart
Dry Times at 70-80°F
(21-27°C) and 50%
Relative Humidity
Touch
1 hour
Top Coat
24 hours
Fully Dry
24-48 hours
Shelf Life
5 years
Flash Point
90°F (32°C)
Safety Information
For additional information, see SDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The statements of this
literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use of our materials are beyond our
control, we can guarantee these products only to conform to our standards of quality, and our liability, if any, will be limited to replacement of defective
materials. All technical information is subject to change without notice.