Technical Specifications

Rust-Oleum Brands PRODUCT INFORMATION
MARINE COATINGS
ANTIFOULING PAINT
DESCRIPTION A hard protective antifouling paint for use on boat bottoms.
APPEARANCE Flat
PHYSICAL PROPERTIES
RESIN TYPE Modified epoxy/rosin
ACTIVE INGREDIENT Cuprous oxide
SOLVENTS Mineral Spirits
PRACTICAL COVERAGE Approximately 85 sq. ft.
DRY TIMES @70°F (21°C)
and 50% RH
RECOAT 4 hours
LAUNCH After 24 hours
SHELF LIFE 5 years
SURFACE PREPARATION Remove all dirt, grease, oil, salt and chemical contaminants by washing the
surface with commercial detergent or other suitable cleaner. Rinse thoroughly
with fresh water and allow to fully dry.
Remove all loose rust or deteriorated coatings by scraping or wire brush.
APPLICATION Stir thoroughly. Thinning not needed for brush or roller. If sprayed, thin up to
15% with acetone. Apply with good quality brush, roller or spray gun.
The coating may be placed in service in 24 hours.
CLEAN-UP Clean brush, roller, and other tools with mineral spirits.