Technical Specifications

Rust-Oleum Brands PRODUCT INFORMATION
MARINE COATINGS
TOPSIDE PAINT
DESCRIPTION An oil modified alkyd enamel for use above the waterline.
APPEARANCE High Gloss and Semi-gloss
RECOMMENDED PRIMERS 207014 White Wood & Fiberglass Primer
207016 White Metal Primer
PHYSICAL PROPERTIES
RESIN TYPE Oil Modified Alkyd
SOLVENTS Mineral Spirits
PRACTICAL COVERAGE Approximately 100 sq. ft.
DRY TIMES @70°F (21°C)
and 50% RH
TOUCH 2-4 hours
HANDLE 4-7 hours
RECOAT After 24 hours
SHELF LIFE 5 years
SURFACE PREPARATION Remove all dirt, grease, oil, salt and chemical contaminants by washing the
surface with commercial detergent or other suitable cleaner. Rinse thoroughly
with fresh water and allow to fully dry.
Remove all loose rust or deteriorated coatings by scraping or wire brush. For
optimal results apply one coat of primer.
APPLICATION Stir thoroughly. Thinning not needed for brush or roller. If sprayed, thin up to
15% with acetone. Apply with good quality brush, roller or spray gun.
May recoat when fully dry, usually in 24 hours.
CLEAN-UP Clean brush, roller, and other tools with mineral spirits.