How to Guide

AEROSOLS TECHNICAL DATA IC-04
MC1800 SYSTEM
PRECISION LINE
®
INVERTED MARKING CHALK
AEROSOL
1094 Rust-Oleum Corporation Form: GDH-1098
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 032516
Vernon Hills, Illinois 60061 www.rustoleum.com/industrial
An RPM Company
.DESCRIPTION AND USES .
An aerosol applied chalk used for temporary marking
projects on concrete, pavement, gravel, grass, and more.
Designed for marking where a non-permanent
identification is desired. Lasts 15-30 days when
undisturbed.
The MC1800 System aerosols are ideal for temporary
location marking of underground utilities at construction
and excavation sites, or other temporary marking
applications.
.PRODUCTS .
SKU Description
205233 APWA Orange
205234 APWA Yellow
205235 APWA Red
205236 APWA Blue
205237 APWA White
205238 APWA Green
PACKAGING .
Inverted 20 fl. oz. aerosol container (17 oz. fill weight)
12 aerosols/carton
.PRODUCT APPLICATION .
SURFACE PREPARATION
ALL SURFACES: Remove loose contaminants by
sweeping the surface before application of the coating.
APPLICATION
Use when temperature is above 32˚F (0˚C) and humidity is
below 85% to ensure proper drying. Protect surrounding
surfaces from overspray. Overspray can carry a significant
distance. Shake can vigorously for one minute after mixing
ball is heard. Invert can and point at ground or floor. Hold
can 4-6 inches above surface to be marked. Press in
sideways to spray or use Rust-Oleum Marking Wand item
#2393000 or Rust-Oleum Marking Pistol item #210188.
Follow directions for proper use of this equipment. Keep
can moving to prevent build-up.
REMOVAL
Marking Chalk will normally fade through ordinary
weathering in about 15 to 30 days. Earlier removal can be
accomplished by washing with a stiff bristle brush and
water or by pressure cleaning.
CLEAN UP
Clean valve by spraying upright for 2 to 3 seconds after
each use. If valve clogs, carefully remove spray tip and
clean in thinner. Do not insert any object into can valve
opening.
.PHYSICAL PROPERTIES .
ALKYD ACCELERATOR
Resin
Modified Alkyd
Pigments
Varies with color
Solvents
Acetone, Toluene, Xylene
MIR
1.20 Max
Fill Weight
17 ounces
Practical Coverage
Approximately 500-530 linear feet at 1.25 inches wide
Dry Times at 70-80°F (21-27°C)
and 50% Relative Humidity
Scuff resistant in approximately 10 minutes
Shelf Life
5 years
Safety Information
For additional information, see SDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.