Technical Specifications

TECHNICAL DA T A
EPOXYSHIELD
®
SOLVENT-BASED PROFESSIONAL FLOOR COA TING
®
PHYSICAL PROPER TIES
SOLVENT-BASED PROFESSIONAL FLOOR COA TING
Resin T ype
Amine cured epoxy
Solvents
N-Butanol, Methyl Isobutyl Ketone, Xylene
W eight*
Per Gallon
12.1-12.4 lbs.
Per Liter
1.4-1.5 kg
Solids*
By W eight
82.5-84.7%
By V olume
69.1-72.1%
Volatile Organic Compounds*
<250 g/l (2.1 lbs./gal.)
Mixing Ratio
1:1 Base to Activator (by volume)
Recommended Dry Film
Thickness (DFT) Per Coat
3.5-5.0 mils (87.5-125µ)
Wet Film to Achieve DFT
(Unthinned Material)
5.0-7.0 mils (125-175µ)
Theoretical Coverage at
1 mil DFT (25µ)
1,108-1,156 sq.ft./gal. (27.2-28.4 m
2
/l)
Practical Coverage at Recommended
DFT (assumes 15% material loss)
300-400 sq.ft./gal. (28-37 m
2
/l)
Induction P eriod
30 minutes @ 70-85°F (21-30°C)
60 minutes @ 60-70°F (15-21°C)
Pot Life @ 70-80°F (21-27°C)
and 50% Rel. Hum.
Varies with temperature and gallons mixed – See chart in directions
Dry T imes
at 70-80°F
(21-27°C) and
50% Rel. Hum.
Lt. Foot Traffic
16 hours
Hv. Foot Traffic
24 hours
Vehicle Traffic
4 days
Shelf Life
5 years
Safety
Information
Flash P oint
Base Component: 80°F (27°C) • Activator Component: 40°F (4.4°C)
Contains
—
W arning!
FOR ADDITIONAL INFORMATION, SEE MSDS .
Calculated values may vary slightly from the actual manufactured ma terial.
*Activated ma terial.