Technical Specifications

2
Form: CS1170
Rev.: 101712
TECHNICAL DATA
PAINTER’S TOUCH ULTRA COVER 2X ENAMEL BRUSH
PRODUCT APPLICATION (cont.) .
.
PRIMING
Use of Painter’s Touch® Primer provides a sound base for
topcoat adhesion and is especially recommended for bare
wood and metal. The following primers are recommended.
1980502 Gray Primer
224430T Black Primer
APPLICATION
Before using, stir thoroughly to ensure any settled pigment
is re-dispersed. Thinning is not required. In hot, dry
conditions, thin with up to 2 ounces of water per quart to
extend dry time. Avoid painting in direct sunlight or on hot
surfaces. Use a good quality synthetic brush. Avoid
excessive brushing as this will reduce film thickness and
protection. Use light even strokes to ensure smooth and
uniform flow.
DRY & RECOAT TIMES
Dry and recoat times are based on 70ºF and 50% relative
humidity. Allow more time at cooler temperatures. Dries to
touch in 30 minutes, dry to handle in 1 hour, and fully dry
in 2-4 hours. Primers may be top coated after 2-4 hours.
CLEAN-UP
Clean brush and other application tools immediately with
soap and water.