Technical Specifications

1
Form: CS1170
Rev.: 101712
TECHNICAL DATA PTX-02
PAINTER’S TOUCH
ULTRA COVER 2X ENAMEL BRUSH
].DESCRIPTION AND USES .
Rust-Oleum
®
Painter’s Touch
®
Ultra Cover 2X Enamels
provides long lasting protection and durability. This enamel of
offers excellent coverage, chip resistance and color retention.
For even longer, lasting protection, use a Painter’s Touch
®
Primer first.
. .
PAINTING CONDITIONS .
Apply only when air and surface temperatures are above
50ºF (10ºC) and 90ºF (32ºC) and humidity is below 65% to
ensure proper drying.
.PRODUCT APPLICATION .
SURFACE PREPARATION
Remove all dirt, grease, oil, salt and chemical contaminants
by washing the surface with a commercial detergent or other
suitable cleaning method. Ri nse thoroughly with fresh water
and allow to fully dry. All surfaces must be dry at time of
application. Scrape and wire brush or power tool clean to
remove loose rust, scale and deteriorated previous coatings.
Previously coated surfaces must be sound and in good
condition. Smooth, hard, or glossy finishes should be scarified
by sanding to create a surface profile. The Painter’s Touch
®
Enamels are compatible with most c oatings, but a test patch
is suggest ed. W ARNING! If you scr ape, sand or remove old
paint from any surface, you may release lead paint dust.
LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE
SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE;
ESPECIALLY IN CHI LDREN. PREGNANT W OMEN
SHOULD ALSO AVOID EXPOSURE. W ear a NIOSH
approved respirator to control lead exposure. Clean up
carefully with a HEPA vacuum and a wet mop. Before you
start, find out how to protect yourself and your family by
contacting the National Lead Information Hotline at
1-800-424-LEAD or log on to www.epa.gov/lead.