Technical Specifications

TECHNICAL DATA
WOODLIFE
®
COPPERCOAT
™
Rust-Oleum Corporation Form: GDH-417
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 061915
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
.PHYSICAL PROPERTIES .
WOODLIFE COPPERCOAT
Solvents
Water
Weight
Per Gallon
8.45 lbs.
Per Liter
1.01 kg
Solids
By Weight
9.1%
By Volume
7.8%
Volatile Organic Compounds
<350g/l (2.92 lbs / gal)
Practical Coverage at Recommended
DFT (assumes 15% material loss)
100-300 sq.ft./gal.
Depends on wood type and porosity
Dry Times at 70-80°F (21-27°C) and
50% Relative Humidity
Allow wood to dry at least 24 hours before installation
or over-coating with paint or stain.
Shelf Life
3 years
Flash Point
>200° F (93°C)
Storage
Keep from freezing
Safety information
For additional information, see MSDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.