How to Guide

AEROSOL TECHNICAL DATA IC-01
1600 SYSTEM
MULTI-PURPOSE ENAMEL AEROSOL
Form: GDH-11
Rev.: 021615
1
.DESCRIPTION AND USES .
Industrial Choice
®
1600 System Sprays are fast-dry, multi-
purpose, modified alkyd enamel aerosols for everyday
indoor/outdoor industrial applications. These aerosols will
spray in any position. Not for use on galvanized steel.
Galvanizing aerosols are used for touch-up and repair to
damaged galvanized steel. Do not topcoat with an alkyd
finish.
Industrial Choice 1600 System Sprays comply with USDA
FSIS regulatory sanitation performance standards for food
establishment facilities.
.PRODUCTS .
SKU Description
PRIMERS
257400 Black Primer
1667830 Red Primer
1680830 Gray Primer
1681830 White Primer
ENAMELS (FLAT, SEMI-GLOSS & GLOSS FINISHES)
202211 Machine Green
202214 Machinery Gray
202216 Dusty Pink
214644 Electric Green
214645 ANSI 61 Light Gray
214646 ANSI 49 Medium Light Gray
214647 ANSI 70 Light Gray
257399 Purple
257401 Emerald Green
257402 Semi-Gloss White
273878 Waste Management Green
1610830 Crystal Clear
1614830 Dull Aluminum
1622830 Regal Blue
1624830 OSHA Safety Blue
1626830 True Blue
1633830 OSHA Safety Green
1638830 Hunter Green
1643830 School Bus Yellow
1644830 OSHA Safety Yellow
1653830 OSHA Safety Orange
1660830 OSHA Safety Red
1664830 Cherry Red
1666830 Banner Red
1670830 OSHA Safety Purple
1671830 Beige
1672830 Almond
1674830 Leather Brown
1676830 Ultra-Flat Black
1678830 Semi-Flat Black
1679830 Gloss Black
1684830 Dove Gray
1686830 Universal Gray
1688830 Smoke Gray
1690830 Flat White
1692830 Gloss White
1696830 Antique White
.PRODUCTS (cont.) .
SKU Description
FLUORESCENTS
1632830 Fluorescent Green
1642830 Fluorescent Yellow
1654830 Fluorescent Orange
1655830 Fluorescent Red-Orange
1659830 Fluorescent Pink
GALVANIZING
1685830 Cold Galvanizing Compound
244305 Bright Galvanizing Compound
.PACKAGING .
6 aerosols (16 fl. oz. container, 12 oz. weight fill) per carton.
Galvanizing aerosols: 6 aerosols (16 fl. oz. container, 14 oz.
weight fill) per carton. 242657: 6 aerosols (16 fl. oz. container,
11 oz. weight fill) per carton.
.PRODUCT APPLICATION .
SURFACE PREPARATION
ALL SURFACES: Remove all dirt, grease, oil, salt and
chemical contaminants by washing the surface with Pure
Strength
®
Cleaner/ Degreaser item #3599402, commercial
detergent or other suitable cleaner. Rinse immediately and
thoroughly and allow to fully dry. Thoroughly cured, hard or
gloss previous coatings which are very smooth may require
scuff sanding to maximize adhesion. This coating may not be
compatible with some types of plastics. It is strongly
suggested a small test patch be done before applying to any
plastic. Also, some plastics, like polycarbonate, are never to
be painted. Consult with the manufacture.
STEEL: Hand tool (SSPC-SP-2) or power tool (SSPC-SP-3)
clean to remove loose rust, mill scale, and deteriorated
previous coatings. For best results, use Red Primer on sound
rusted or clean metal before the application of a finish coat or
intermediate primer.
GALVANIZED STEEL: New galvanized steel may contain a
surface wax or oil from the fabricator. This must be removed
with Pure Strength
®
Cleaner/Degreaser (#3599402),
commercial detergent or other suitable cleaner. NOTE: Only
the Galvanizing Compounds are to be used on galvanized
steel. Do not use any other of the 1600 System Primers or
Finish Colors.
WEATHERED GALVANIZED STEEL: Remove loose rust and
stains by hand tool (SSPC-SP-2) or power tool (SSPC-SP-3)
prior to application of the Cold Galvanizing Compound.
APPLICATION
Use when temperature is above 50°F (10°C) and humidity is
below 85% to ensure proper drying. Surface temperature
must be between 50-100°F (10-38°C). Use a primer on bare
or rusted surfaces. Protect surrounding surfaces from
overspray. Overspray can carry a significant distance. Shake
can for one minute after mixing ball is heard. Hold can 10-14"
from surface. Apply several light coats a few minutes apart to
avoid drips and runs. This aerosol will spray in any position or
angle, including upside down.