Use and Care Manual
TECHNICAL DATA
UNIVERSAL METALLIC SPRAYS
Rust-Oleum Australia HAYDN BRUSH CO. LTD. Form: GDH-795
Unit 12, 4 Southridge Street PO Box 4325 Rev.: 043015
Eastern Creek, NSW 2766 Christchurch, New Zealand
PH: 1 300 784 476 PH. 64 3 384 7770
www.rustoleum.com.au email: mail@haydn,co.nz
email: sales@rustoleum.com.au
PHYSICAL PROPERTIES .
UNIVERSAL METALLIC SPRAYS
Resin Type
Modified Alkyd
Pigment Type
Varies with Colour
Solvents
Acetone, Ketone blend
MIR
1.9 Max
Fill Weight
310 grams
Recommended Dry Film Thickness
(DFT) per Coat
25-50µ
Practical Coverage at Recommended
DFT (assumes 15% material loss)
0.9- 1.4 m
2
/can
Dry Times at 21-27°C
and 50% Relative
Humidity
Touch
30 minutes
Handle
1 hour
Recoat
Within 1 hour or after 48 hours
Dry Heat Resistance
93ºC
Shelf Life
5 years
Flash Point
-104ºC
Safety Information
For additional information, see MSDS.
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The statements of this
literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use of our materials are beyond our
control, we can guarantee these products only to conform to our standards of quality, and our liability, if any, will be limited to replacement of defective
materials. All technical information is subject to change without notice.