Use and Care Manual
TECHNICAL DATA 
CABINET TRANSFORMATIONS
TM
  Rust-Oleum Corporation    Form: CS1796 
  11 Hawthorn Parkway  Phone: 877•385•8155  Rev.: 043013 
  Vernon Hills, Illinois 60061  www.rustoleum.com 
  An RPM Company 
. PHYSICAL PROPERTIES      . 
DEGLOSSER 
BOND COAT 
TOP COAT 
Resin Type 
None 
Acrylic / Urethane 
Acrylic / Urethane 
Pigment Type 
None 
Titanium dioxide, mica, inerts 
Titanium dioxide, mica, inerts 
Solvents 
Water 
Water 
Water 
Weight 
Per Gallon 
8.40 lbs. 
9.80-11.90 lbs. 
8.47 lbs. 
Per Liter 
— 
— 
— 
Solids 
By Weight 
4.8% 
40-58% 
29% 
By Volume 
4.5% 
30-42% 
27% 
Volatile Organic Compounds 
<465 g/l 
(3.85 lbs./gal.) 
<85 g/l 
 (0.70 lbs./gal.) 
<272 g/l 
 (2.3 lbs./gal.) 
Recommended Dry Film 
Thickness (DFT) Per Coat 
NA 
2.0-2.5 mils 
 (50-62.5µ) 
4.0-8.0 mils 
 (100-200µ) 
Wet Film to Achieve DFT 
(unthinned material) 
— 
6.6-7.5 mils 
(165-187.5µ) 
14.8-30.0 mils 
(370-750µ) 
Practical Coverage at 
Recommended DFT (assumes 15% 
material loss) 
— 
160-200 sq. ft./gal. 
(3.9-4.7 m
2
/l) 
46-92 sq. ft./gal. 
(1.1-2.3 m
2
/l) 
Dry Times at 
77°F (25°C) 
and 50% 
Relative 
Humidity 
Working Time 
30 minutes 
30 minutes 
30 minutes 
Dry to Recoat 
1 hour 
2-3 hours 
n/a 
Full Cure 
n/a 
n/a 
24 hours 
Dry Heat Resistance 
n/a 
200°F (93°C) 
200°F (93°C) 
Shelf Life 
n/a 
3 years 
3 years 
Storage 
Store in a dry area between 40-100°F (4.5-38°C) 
Safety 
Information 
Flash Point 
220°F (105°C) 
215°F (102°C) 
215°F (102°C) 
Warning! 
COMBUSTIBLE LIQUID AND VAPOR. HARMFUL IF INHALED. MAY AFFECT BRAIN OR 
NERVOUS SYSTEM CAUSING DIZZINESS, HEADACHE OR NAUSEA. CAUSES 
RESPIRATORY TRACT, EYE AND SKIN IRRITATION. FOR INDUSTRIAL OR COMMERCIAL 
USE ONLY. KEEP OUT OF REACH OF CHILDREN. 
SEE THE PRODUCT MATERIAL SAFETY DATA SHEET (MSDS) 
AND LABEL WARNINGS FOR ADDITIONAL SAFETY INFORMATION. 
The  technical  data  and  suggestions  for  use  contained  herein  are  correct  to  the  best  of  our  knowledge,  and  offered  in  good  faith.  The 
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use 
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any, 
will be limited to replacement of defective materials. All technical information is subject to change without notice.



