Use and Care Manual
TECHNICAL DATA
TILE TRANSFORMATIONS
TM
KIT
Rust-Oleum Corporation Form: GDH-513
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 102014
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
. PHYSICAL PROPERTIES .
Textured Bond Coat
Natural Stone Finish
Resin Type
Epoxy Amine
Epoxy Amine
Pigment Type
Titanium Dioxide
None
Solvents
DPNB, Acetone, Xylene
DPNB, Acetone, Xylene
Weight*
Per Gallon
11.0 lbs.
9.0 lbs.
Per Liter
1.32 kg
1.08 kg
Solids*
By Weight
87.3%
86.3%
By Volume
79.6%
82.4%
Volatile Organic Compounds*
<100g/l
(0.83 lbs./gal.)
<100 g/l
(0.83 lbs./gal.)
Recommended Dry Film
Thickness (DFT) per Coat
3.0-5.0 mils
(75-125µ)
2.0-3.0 mils
(50-75µ)
Wet Film to Achieve DFT
(Unthinned material)
4.0-6.0 mils
(100-150µ)
2.5-3.5 mils
(62.5-87.5µ)
Theoretical Coverage at
1 mil DFT (25µ)
319 sq.ft./quart
(7.8 m
2
/l)
165 sq.ft./pint
(8.1 m
2
/l)
Practical Coverage at Recommended DFT
(assume 15% material loss)
50-80 sq.ft./quart
(1.2-2.0 m
2
/l)
50-70 sq.ft./pint
(1.2-1.7 m
2
/l)
Dry Times at 70-80°F
(21-27°C) and 50%
Relative Humidity
Tack-free
4 hours
4 hours
Handle
8 hours
8 hours
Recoat
8 hours or overnight
NA
Full Use
NA
24 hours
Shelf Life
2 years
2 years
Flash Point
<32ºF (0ºC) Base
100°F (38°C) Activator
40°F (4°C) Base
100°F (38°C) Activator
Warning!
Contains Acetone and Xylene.
Use with adequate ventilation.
Contains Acetone and Xylene. Use
with adequate ventilation.
Safety Information
For additional information, see MSDS
* Activated material
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.