Instructions / Assembly

Continue with Cabinet Doors and Drawers:
E. For easier application purposes, use a prop to elevate the door off the worktable.
See “Cabinetry Preparation & Repair” in the FAQ Section for additional tips.
F. Begin with the BACK SIDE of each door. Use a 2” angled or straight synthetic brush to
apply an even coat of Bond Coat.
Use the following application method:
1. Apply Bond Coat to all four inside corners and sides
2. Coat center panel with long, smooth vertical strokes
3. Coat the top and bottom portions with long, horizontal strokes
4. Brush outer sides in a vertical motion
Note: For flat panel doors use up-and-down vertical strokes. Use side-to-side
horizontal strokes on drawers.
G. Look for excess Bond Coat in corners and crevasses and use the paint brush to remove
build up. Let dry for 2 – 3 hours.
H. Once the first coat is dry, come back and complete a second coat using the same method.
Let dry for an additional 2 – 3 hours.
1234