Instructions / Assembly

APPLICATION TIPS
Q. CAN I SPRAY OR ROLL ON CABINET TRANSFORMATIONS™?
A. It is not recommended to spray or roll on the Bond Coat of the Cabinet
Transformations™ if you plan on applying the Decorative Glaze. As the glaze is wiped
off with the Decorative Glazing Cloth, some glaze naturally remains in the vertical
grooves made by the brush marks from the Bond Coat. Spraying or rolling on the
Bond Coat eliminates the possibility of achieving this effect.
Q. CAN I SPRAY CABINET TRANSFORMATIONS IF I DO NOT INTEND TO USE THE
DECORATIVE GLAZE?
A. You may spray Cabinet Transformations™ only when you do not intend to use
Decorative Glaze in the system. To spray the Bond Coat, reduce with up to
30% water and use a HVLP sprayer at 35psi. To spray the Protective Top Coat,
reduce with up to 10% water and use a HVLP sprayer at 35psi. Ideal spray
temperature and humidity conditions are 78ºF with 35% humidity.
Q. HOW DO HUMIDITY AND TEMPERATURE AFFECT THE COATING APPLICATION
PROCESS?
A. Higher humidity will cause the coating to dry more slowly while lower humidity will
cause the coating to dry more quickly. Apply when air (ambient) temperature is 50-
90ºF (10-32ºC) and relative humidity is below 60%.
Q. HOW DO I DISPOSE OF UNUSED PRODUCT AND SOILED RAGS OR BRUSHES?
A. Cover any unused products tightly for storage. All tools can be cleaned with water.
Discard unwanted product according to local regulations.
continued