Instructions / Assembly

APPLICATION TIPS
Q. BESIDES LAMINATE, WHAT OTHER SURFACES CAN BE REFINISHED WITH
COUNTERTOP TRANSFORMATIONS™?
A.
With proper surface preparation, the Transformations™ coating system also
adheres to hardwood and metal trim. All countertop materials should be
sanded thoroughly with the Diamond Embedded Sanding Tool and tested for
good Adhesive Base Coat adhesion before coating the entire surface area.
Q. WHAT OTHER ROLLERS CAN I USE IF I DO NOT FIND A MICROFIBER
ROLLER?
A. Although it is recommended that you use a (3/8” nap) 6” Microfiber Roller, the
following will suffice:
• 6” Multi-Purpose • General Purpose Polyester
• 6” Woven Roller
Q. HOW DO I REFINISH AROUND SINKS, STOVES, AND OTHER APPLIANCES?
A. Mask the sink and adjacent areas using smooth painters tape. Be thorough
about pressing in the edge to ensure none of the coating will bleed through.
Make sure you cover the sink drain to keep Decorative Chips from falling in.
If you are planning on replacing your sink in the near future, now is an
ideal time.
Q. HOW CAN I AVOID POTENTIAL APPEARANCE PROBLEMS?
A. Uneven Chip Application: Apply a heavy, even coating of Adhesive Base Coat
to allow the Decorative Chips to adhere consistently. Work quickly and do not
allow the Adhesive Base Coat to dry.