Instructions / Assembly

IMPORTANT: Only use Wetting Agent on Adhesive Base Coat - Do not use with
Protective Top Coat. Avoid getting Wetting Agent on painted surfaces,
appliances, cabinets or countertops that have not been coated with
Adhesive Base Coat.
STEP #2 APPLY WETTING AGENT
The Wetting Agent keeps the Adhesive Base Coat wet longer and improves
the adhesion of the Decorative Color Chips.
A. Screw on the trigger and shake the Wetting Agent well before using.
B. Spray a light misting of Wetting Agent on the freshly applied Adhesive Base
Coat. Be certain to hit the backsplash and the front edge in its entirety given
these areas dry the quickest. Spray to wet the surface but do not allow to puddle.
C. Immediately proceed to applying the Decorative Color Chips.
E. Once the Adhesive Base Coat has been applied to the entire surface, re-wet
your roller and re-roll in one, uniform direction towards your body.
F. After the Adhesive Base Coat has been applied, quickly inspect the entire
countertop for sags, mistakes, or areas of thin coverage. Apply more
Adhesive Base Coat where necessary. To repair accidental bumps,
see “Preparation and Repair” in the FAQ section.