Instructions / Assembly

STEP #3 APPLY DECORATIVE CHIPS

(

Time: approximately 20 minutes for 50 square feet of countertops)

Decorative Chips need to be dispersed quickly over the entire surface of the

countertop before the Adhesive Base Coat dries. By the time you have ﬁnished,

the entire countertop, backsplash, and front edge should be completely covered

with Decorative Chips. Once the Decorative Chips have been applied, DO NOT

TOUCH the countertop until the coated surface has dried overnight

(a minimum of 12 hours).

A. While the Adhesive Base Coat is still wet, immediately apply the Decorative

Chips using the Decorative Chip Dispenser ﬁlled earlier. If areas of the

Adhesive Base Coat begin to dry, recoat them with additional Adhesive Base

Coat. Set the Decorative Chip Dispenser to #2, pull trigger and turn the

handle clockwise at a steady pace.

B. Apply the Decorative Chips using the following application method:

1. Apply Decorative Chips onto the

backsplash.

2. Quickly apply Decorative Chips to

the front edge.

3. Apply a full coverage of the

Decorative Chips over the entire

ﬂat surface.

Remember: More is Better! Apply enough Decorative Chips to completely

cover the entire backsplash, front edge and ﬂat surface. Reﬁll Decorative Chip

Dispenser as needed.

20 MINUTES

Tools to have ready: Chip Dispenser filled 3/4 full

with Decorative Chips