Use and Care Manual

TECHNICAL DATA
CABINET TRANSFORMATIONS
TM
Form: CS1796
Rev.: 043013
2
.PRODUCT APPLICATION (CONT.)
APPLICATION OF DECORATIVE GLAZE (optional)
The Decorative Glaze enhances the look of the cabinets
by accenting the Bond Coat color giving a high-end,
custom look. Thoroughly stir the Decorative Glaze using a
stir stick. Working in cabinet door, drawer or frame
sections, use a 2” synthetic brush or 2” foam brush to
liberally coat the surface with Decorative Glaze. Be sure to
coat all corners, crevices, and raised panel sections.
Using the Decorative Glazing Cloths, wipe the surface in
the direction of the grain to remove the glaze to your
desired look. If dissatisfied, while wet, wipe completely
clean with a damp cloth and repeat the glazing process.
Allow the Decorative Glaze to dry for a minimum of 8
hours before applying the Protective Top Coat.
APPLICATION OF THE TOPCOAT
The topcoat is formulated with self cross-linking
technology that provides superior stain and scratch
resistance.
IMPORTANT: The Protective Top Coat dries quickly. For
best results, avoid re-brushing previously coated areas
that have started to dry.
Allow to dry 12 hours before installing cabinet drawers and
hardware. Allow 24 hours before full use. Avoid using
cleaners on new cabinetry for 7 days.
.