Use and Care Manual

TECHNICAL DATA
STOPS RUST ALUMINUM PRIMER QUART
Rust-Oleum Corporation Form: CS2153
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 022513
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
PHYSICAL PROPERTIES .
PRIMER
Resin Type
Water-based Acrylic
Pigment Type
Titanium dioxide
Solvents
Water, Propylene Glycol, Ester Alcohol
Weight
Per Gallon
10.2 lbs.
Per Liter
1.2 kg
Solids
By Weight
51.5%
By Volume
40.4%
Volatile Organic Compounds
<150 g/l
(1.14 lbs./gal.)
Recommended Dry Film Thickness
(DFT) Per Coat
1.5-2.5 mils
(37.5-62.5µ)
Wet Film to Achieve DFT
4.0-6.0 mils
(100-150µ)
Theoretical Coverage at
1 mil DFT (25µ)
162 sq.ft./qt.
(15.9 m
2
/l)
Practical Coverage
at Recommended DFT
55-90 sq.ft./qt.
(5.0-8.2 m
2
)
Dry Times at
70°F (21°C) and
50% Relative
Humidity
Touch
1-2 hours
Handle
2-4 hours
Recoat
24 hours
Shelf Life
5 years
Flash Point
>200°F (93°C)
Safety Information
For additional information, see MSDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The statements of this literature
do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use of our materials are beyond our control, we
can guarantee these products only to conform to our standards of quality, and our liability, if any, will be limited to replacement of defective materials. All
technical information is subject to change without notice.