MSDS

Carbon black is listed as a Group 2B-"Possibly carcinogenic to humans" by IARC and is proposed to be listed as
A4- "not classified as a human carcinogen" by the American Conference of Governmental Industrial Hygienists.
Significant exposure is not anticipated during brush application or drying. Risk of overexposure depends on
duration and level of exposure to dust from repeated sanding of surfaces or spray mist and the actual
concentration of carbon black in the formula.
Primary Route(s) Of Entry: Skin Contact, Skin Absorption, Inhalation, Ingestion, Eye Contact
First Aid - Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes holding eyelids open.
Get medical attention. Do NOT allow rubbing of eyes or keeping eyes closed.
First Aid - Skin Contact: Wash with soap and water. Get medical attention if irritation develops or persists.
First Aid - Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give
oxygen. Get immediate medical attention. Do NOT use mouth-to-mouth resuscitation.
First Aid - Ingestion: Aspiration hazard: Do not induce vomiting or give anything by mouth because this material
can enter the lungs and cause severe lung damage. Get immediate medical attention.
Flash Point: 104 F (Setaflash)
Extinguishing Media: Film Forming Foam, Carbon Dioxide, Dry Chemical, Dry Sand, Water Fog
Unusual Fire And Explosion Hazards: Keep containers tightly closed.
Special Firefighting Procedures: Water may be used to cool closed containers to prevent pressure buildup and
possible autoignition or explosion. Evacuate area and fight fire from a safe distance.
Steps To Be Taken If Material Is Released Or Spilled: Contain spilled liquid with sand or earth. DO NOT use
combustible materials such as sawdust. Dispose of according to local, state (provincial) and federal regulations.
Do not incinerate closed containers.
Handling: Wash thoroughly after handling. Wash hands before eating. Follow all MSDS/label precautions even
after container is emptied because it may retain product residues. Avoid breathing vapor or mist. Avoid contact
with eyes.
Storage: Keep away from heat, sparks, flame and sources of ignition. Keep containers tightly closed. Isolate from
heat, electrical equipment, sparks and open flame. Keep container closed when not in use.
Engineering Controls: Use process enclosures, local exhaust ventilation, or other engineering controls to control
Section 4 - First Aid Measures
Section 5 - Fire Fighting Measures
Section 6 - Accidental Release Measures
Section 7 - Handling And Storage
Section 8 - Exposure Controls / Personal Protection
Page
2
of
5
7779502 STRUST QT 2PK GLOSS BLACK