SDS

Date Printed: 3/9/2020
9. Physical and Chemical Properties
Appearance:
Aerosolized Mist
Physical State:
Liquid
Odor:
Solvent Like N.E.
Odor Threshold:
Specific Gravity:
0.795
pH:
N.D.
Freeze Point, °C:
N.D.
Viscosity:
N.D.
Solubility in Water:
Slight
Partition Coefficient, n-octanol/
water:
N.D.
Decompostion Temp., °C:
N.D.
Boiling Range, °C:
31 - 5,432
Explosive Limits, vol%:
0.6 - 13.0
Flammability:
Supports Combustion -96
Flash Point, °C:
Auto-ignition Temp., °C:
Evaporation Rate:
Slower than Ether N.D.
Vapor Density:
Heavier than Air
Vapor Pressure:
N.D.
(See "Other information" Section for abbreviation legend)
10. Stability and Reactivity
CONDITIONS TO AVOID: Avoid temperatures above 120°F (49°C). Avoid all possible sources of ignition.
INCOMPATIBILITY: Incompatible with strong oxidizing agents, strong acids and strong alkalies.
HAZARDOUS DECOMPOSITION: By open flame, carbon monoxide and carbon dioxide. When heated to decomposition, it emits
acrid smoke and irritating fumes. Contains solvents which may form carbon monoxide, carbon dioxide, and formaldehyde.
HAZARDOUS POLYMERIZATION: Will not occur under normal conditions.
STABILITY: This product is stable under normal storage conditions.
11. Toxicological Information
EFFECTS OF OVEREXPOSURE - EYE CONTACT: Causes Serious Eye Irritation
EFFECTS OF OVEREXPOSURE - SKIN CONTACT: May be absorbed through the skin in harmful amounts. May cause skin
sensitization, an allergic reaction, which becomes evident upon re-exposure to this material.
EFFECTS OF OVEREXPOSURE - INHALATION: Harmful if inhaled. High gas, vapor, mist or dust concentrations may be harmful if
inhaled. Avoid breathing fumes, spray, vapors, or mist. High vapor concentrations are irritating to the eyes, nose, throat and lungs.
Prolonged or excessive inhalation may cause respiratory tract irritation.
EFFECTS OF OVEREXPOSURE - INGESTION: Harmful if swallowed.
EFFECTS OF OVEREXPOSURE - CHRONIC HAZARDS: May damage fertility or the unborn child. May cause central nervous
system disorder (e.g., narcosis involving a loss of coordination, weakness, fatigue, mental confusion, and blurred vision) and/or
damage. High concentrations may lead to central nervous system effects (drowsiness, dizziness, nausea, headaches, paralysis, and
blurred vision) and/or damage. Reports have associated repeated and prolonged occupational overexposure to solvents with
permanent brain and nervous system damage. Overexposure to xylene in laboratory animals has been associated with liver
abnormalities, kidney, lung, spleen, eye and blood damage as well as reproductive disorders. Effects in humans, due to chronic
overexposure, have included liver, cardiac abnormalities and nervous system damage. Contains carbon black. Chronic
inflammation, lung fibrosis, and lung tumors have been observed in some rats experimentally exposed for long periods of time to
excessive concentrations of carbon black and several insoluble fine dust particles. Tumors have not been observed in other animal
species (i.e., mouse and hamster) under similar circumstances and study conditions. Epidemiological studies of North American
workers show no evidence of clinically significant adverse health effects due to occupational exposure to carbon black.
Carbon black is listed as a Group 2B-"Possibly carcinogenic to humans" by IARC and is proposed to be listed as A4- "not classified
as a human carcinogen" by the American Conference of Governmental Industrial Hygienists. Significant exposure is not anticipated
during brush application or drying. Risk of overexposure depends on duration and level of exposure to dust from repeated sanding of
surfaces or spray mist and the actual concentration of carbon black in the formula. IARC lists Ethylbenzene as a possible human
carcinogen (group 2B). Contains Titanium Dioxide. Titanium Dioxide is listed as a Group 2B-"Possibly carcinogenic to humans" by
IARC. No significant exposure to Titanium Dioxide is thought to occur during the use of products in which Titanium Dioxide is bound
to other materials, such as in paints during brush application or drying. Risk of overexposure depends on duration and level of
exposure to dust from repeated sanding of surfaces or spray mist and the actual concentration of Titanium Dioxide in the formula.
(Ref: IARC Monograph, Vol. 93, 2010)May cause genetic defects.
PRIMARY ROUTE(S) OF ENTRY: Eye Contact, Ingestion, Inhalation, Skin Absorption, Skin Contact
ACUTE TOXICITY VALUES
The acute effects of this product have not been tested. Data on individual components are tabulated below:
CAS-No. Chemical Name Oral LD50 Dermal LD50 Vapor LC50
67-64-1 Acetone 5800 mg/kg Rat >15700 mg/kg Rabbit 50.1 mg/L Rat
123-86-4 n-Butyl Acetate 10768 mg/kg Rat >17600 mg/kg Rabbit > 21 mg/L Rat
13463-67-7 Titanium Dioxide >10000 mg/kg Rat 2500 mg/kg N.E.
Page 5 / 7