Use and Care Manual

TECHNICAL DATA
STOPS RUST OUTDOOR METALLIC SPRAYS
Rust-Oleum Corporation Form: CS2164
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 022813
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company⅗
PHYSICAL PROPERTIES .
OUTDOOR METALLIC SPRAYS
Resin Type
Solvent Acrylic
Pigment Type
Varies with color
MIR
1.9 Max
Fill Weight
11 ounces
Solvents
Acetone, Toluene, Xylene
Recommended Dry Film
Thickness (DFT) Per Coat
1.0-2.0 mils
(25-50µ)
Practical Coverage at Recommended
DFT (assumes 15% material loss)
10-12 sq. ft./can
(0.9-1.09 m
2
/can)
Dry Times at
70°F (21°C) and
50% Relative
Humidity
Tack-free
10 minutes
Handle
30 minutes
Recoat
Anytime
Dry Heat Resistance
200°F (93°C)
Shelf Life
5 years
Flash Point
-156°F (-104°C)
Safety Information
For additional information, see MSDS.
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The statements of this literature
do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use of our materials are beyond our control, we
can guarantee these products only to conform to our standards of quality, and our liability, if any, will be limited to replacement of defective materials. All
technical information is subject to change without notice.