SDS

Date Printed: 8/25/2022
6. Accidental Release Measures
STEPS TO BE TAKEN IF MATERIAL IS RELEASED OR SPILLED: Contain spilled liquid with sand or earth. DO NOT use
combustible materials such as sawdust. Isolate the hazard area and deny entry to unnecessary and unprotected personnel. Remove
all sources of ignition, ventilate area and remove with inert absorbent and non-sparking tools. Dispose of according to local, state
(provincial) and federal regulations. Do not incinerate closed containers. Ventilate area, isolate spilled material, and remove with
inert absorbent. Dispose of contaminated absorbent, container, and unused contents in accordance with local, state, and federal
regulations.
7. Handling and Storage
HANDLING: Wash thoroughly after handling. Wash hands before eating. Remove contaminated clothing and launder before reuse.
Use only with adequate ventilation. Follow all SDS and label precautions even after container is emptied because it may retain
product residues. Avoid breathing fumes, vapors, or mist. Avoid contact with eyes, skin and clothing.
STORAGE: Keep containers tightly closed. Isolate from heat, electrical equipment, sparks and open flame. Contents under
pressure. Do not store above 120°F (49°C). Store large quantities in buildings designed and protected for storage of flammable
aerosols. Keep away from heat, sparks, flame and sources of ignition. Avoid excess heat. Product should be stored in tightly sealed
containers and protected from heat, moisture, and foreign materials.
Advice on Safe Handling of Combustible Dust: No Information
8. Exposure Controls / Personal Protection
Chemical Name CAS-No.
Weight %
Less Than
ACGIH TLV-
TWA
ACGIH TLV-
STEL
OSHA PEL-TWA
OSHA PEL-
CEILING
Acetone 67-64-1 40.0 250 ppm 500 ppm 1000 ppm N.E.
Propane 74-98-6 25.0 N.E. N.E. 1000 ppm N.E.
n-Butyl Acetate 123-86-4 20.0 50 ppm 150 ppm 150 ppm N.E.
Dimethyl Carbonate 616-38-6 15.0 N.E. N.E. N.E. N.E.
Aliphatic Hydrocarbon 64742-89-8 15.0 N.E. N.E. N.E. N.E.
n-Butane 106-97-8 10.0 N.E. 1000 ppm N.E. N.E.
Xylenes (o-, m-, p- Isomers) 1330-20-7 10.0 20 ppm N.E. 100 ppm N.E.
Hydrotreated Light Distillate 64742-47-8 10.0 N.E. N.E. N.E. N.E.
Methyl Ethyl Ketone 78-93-3 5.0 200 ppm 300 ppm 200 ppm N.E.
1-Methoxy-2-Propyl Acetate 108-65-6 5.0 N.E. N.E. N.E. N.E.
Naphtha, Petroleum,
Hydrotreated Light
64742-49-0 5.0 N.E. N.E. N.E. N.E.
Stoddard Solvent 8052-41-3 5.0 100 ppm N.E. 500 ppm N.E.
Aluminum Flake 7429-90-5 5.0 1 mg/m3 N.E. 15 mg/m3 N.E.
Iso Alkanes, C12-14 68551-19-9 5.0 N.E. N.E. N.E. N.E.
Ethylbenzene 100-41-4 5.0 20 ppm N.E. 100 ppm N.E.
Ethyl 3-Ethoxypropionate 763-69-9 5.0 N.E. N.E. N.E. N.E.
Propylene Glycol Monobutyl
Ether
5131-66-8 5.0 N.E. N.E. N.E. N.E.
Naphtha (Petroleum), Heavy
Aromatic
64742-94-5 5.0 N.E. N.E. N.E. N.E.
Yellow Iron Oxide 51274-00-1 5.0 N.E. N.E. N.E. N.E.
Copper 7440-50-8 5.0 0.2 mg/m3 N.E. 0.1 mg/m3 N.E.
Solvent Naphtha, Light Aromatic 64742-95-6 1.0 N.E. N.E. N.E. N.E.
Carbon Black 1333-86-4 1.0 3 mg/m3 N.E. 3.5 mg/m3 N.E.
Titanium Dioxide 13463-67-7 1.0 0.2 mg/m3 N.E. 15 mg/m3 N.E.
Amorphous Precipitated Silica 112926-00-8 1.0 N.E. N.E. 20 mppcf N.E.
Naphtha, Hydrotreated Heavy 64742-48-9 1.0 N.E. N.E. N.E. N.E.
bis(1,2,2,6,6-Pentamethyl-4-
Piperidinyl) Sebacate
41556-26-7 1.0 N.E. N.E. N.E. N.E.
Chromium 7440-47-3 1.0 0.5 mg/m3 N.E. 1 mg/m3 N.E.
Octane 111-65-9 1.0 300 ppm N.E. 500 ppm N.E.
n-Heptane 142-82-5 1.0 400 ppm 500 ppm 500 ppm N.E.
Petroleum Naphtha,
Hydrodesulfurized Heavy
64742-82-1 1.0 N.E. N.E. N.E. N.E.
Nickel Compounds 7440-02-0 1.0 1.5 mg/m3 N.E. 1 mg/m3 N.E.
Zinc 7440-66-6 1.0 N.E. N.E. N.E. N.E.
Methyl Ethyl Ketoxime 96-29-7 1.0 10 ppm N.E. N.E. N.E.
Ethanol 64-17-5 1.0 N.E. 1000 ppm 1000 ppm N.E.
Zirconium Acetate 5153-24-2 0.1 5 mg/m3 10 mg/m3 5 mg/m3 N.E.
PERSONAL PROTECTION
Stops Rust Metallic Spray Paint 11 Oz. 6 Pack
Page 4 / 8