MSDS

have associated repeated and prolonged occupational overexposure to solvents with permanent brain and
nervous system damage. Overexposure to xylene in laboratory animals has been associated with liver
abnormalities, kidney, lung, spleen, eye and blood damage as well as reproductive disorders. Effects in humans,
due to chronic overexposure, have included liver, cardiac abnormalities and nervous system damage.
Primary Route(s) Of Entry: Skin Contact, Skin Absorption, Inhalation, Eye Contact
First Aid - Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes holding eyelids open.
Get medical attention. Do NOT allow rubbing of eyes or keeping eyes closed.
First Aid - Skin Contact: Wash with soap and water. Get medical attention if irritation develops or persists.
First Aid - Inhalation: If you experience difficulty in breathing, leave the area to obtain fresh air. If continued
difficulty is experienced, get medical assistance immediately.
First Aid - Ingestion: Aspiration hazard: Do not induce vomiting or give anything by mouth because this material
can enter the lungs and cause severe lung damage. Get immediate medical attention.
Flash Point: -156 F (Setaflash)
Extinguishing Media: Film Forming Foam, Carbon Dioxide, Dry Chemical, Water Fog
Unusual Fire And Explosion Hazards: FLASH POINT IS LESS THAN 20 °. F. - EXTREMELY FLAMMABLE
LIQUID AND VAPOR! Perforation of the pressurized container may cause bursting of the can. Isolate from heat,
electrical equipment, sparks and open flame. Water spray may be ineffective. Closed containers may explode
when exposed to extreme heat. Vapors may form explosive mixtures with air. Vapors can travel to a source of
ignition and flash back. Keep containers tightly closed.
Special Firefighting Procedures: Evacuate area and fight fire from a safe distance.
Steps To Be Taken If Material Is Released Or Spilled: Remove all sources of ignition, ventilate area and remove
with inert absorbent and non-sparking tools. Dispose of according to local, state (provincial) and federal
regulations. Do not incinerate closed containers. Contain spilled liquid with sand or earth. DO NOT use
combustible materials such as sawdust.
Handling: Wash thoroughly after handling. Wash hands before eating. Avoid breathing vapor or mist. Use only in
a well-ventilated area. Follow all MSDS/label precautions even after container is emptied because it may retain
product residues.
Storage: Keep containers tightly closed. Isolate from heat, electrical equipment, sparks and open flame. Do not
store above 120 ° F. Store large quantities in buildings designed and protected for storage of NFPA Class I
flammable liquids. Contents under pressure. Do not expose to heat or store above 120 ° F.
Section 4 - First Aid Measures
Section 5 - Fire Fighting Measures
Section 6 - Accidental Release Measures
Section 7 - Handling And Storage
Section 8 - Exposure Controls / Personal Protection
Page
2
of
5
7251830 STRUST +SSPR 6PK METALC COBALT BLUE