Use and Care Manual

TECHNICAL DATA
SRT-59
STOPS RUST
®
CUSTOM SPRAY 5-IN-1 CLEARS
Rust-Oleum Corporation
11 Hawthorn Parkway
Vernon Hills, Illinois 60061
Phone: 800∙481∙4785
www.rustoleum.com
Form: ARJ-2529
Rev.:110122
PHYSICAL PROPERTIES
STOPS RUST CUSTOM SPRAY 5-IN-1CLEARS
Resin Type
Acrylic
Pigment Type
Fumed silica
Solvents
Acetone, n-butyl acetate, PM acetate, dimethyl carbonate, xylene, glycol ether
EEP
MIR
0.85 max
Fill Weight
12 oz.
Recommended Dry Film
Thickness (DFT) per Coat
1.0-3.0 mils
Practical Coverage at Recommended
DFT (assume 15% material loss)
8-10 sq. ft./12oz. can
Dry Times at 77°F
(25ºC) and 50%
Relative Humidity
Touch
15 minutes
Handle
30 minutes
Recoat
Anytime
Shelf Life
5 years
Flash Point
-141°F
Safety Information
For additional information, see SDS
Calculated values are shown and may vary from the actual manufactured material.
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.