Use and Care Manual
TECHNICAL DATA    SRT-07 
STOPS RUST 
  OUTDOOR METALLIC SPRAYS 
                                                                                                                                                                                                Form: CS2164 
                                                                                                                                                                                              Rev.:  022813 
1 
.DESCRIPTION AND USES                                . 
Rust-Oleum
®
 Stops Rust
®
 Outdoor Metallic Sprays are designed 
to provide a durable protective coating with excellent resistance 
to rust, and excellent resistance to abrasion, fading, chipping, 
and dulling which will not rub off. These sprays apply easily, 
provide excellent coverage and dry fast to a tough attractive 
finish. Rust-Oleum Stops Rust Outdoor Metallic Sprays are ideal 
for ferrous, non-ferrous metal and wood surfaces. It features a 
comfort tip with a wider finger pad to reduce fatigue caused by 
continuous spraying and an any-angle tip which allow s you to 
spray at any angle. Not for use on galvanized metal. 
.PRODUCTS                                                    . 
SKU (11 ounce spray)   Description     
7250830    Black Night 
7251830    Cobalt Blue 
7252830    Racing Green 
7255830    Deep Purple 
7256830    Apple Red 
7270830    Gold Rush 
7271830    Silver 
7272830    Dark Bronze 
7273830    Copper 
7274830    Antique Brass 
7275830    Burnished Brass 
7277830    Matte Nickel 
7278830    Matte Silver 
224224    Pale Gold 
224225    Champagne 
224226    Rich Caramel 
224227    Sage 
224228    Charcoal 
248636    Oil Rubbed Bronze 
248637    Vintage Copper 
..PAINTING CONDITIONS                              .
Use outdoors or in a well ventilated area such as an open 
garage. Apply when temperature is between 50-90°F (10-
32°C) and humidity is below 65% to ensure proper drying. 
Do not apply to surfaces, when heated, exceed 200°F 
(93°C). Avoid spraying in very windy and dusty conditions. 
Cover surrounding area to protect from spray mist. 
..PRODUCT APPLICATION                                 . 
SURFACE PREPARATION 
Remove all dirt, grease, oil, salt and chemical 
contaminants by washing the surface with a commercial 
detergent, or other suitable cleaning method. Rinse with 
fresh water and allow to thoroughly dry. Remove loose 
paint and rust with a wire brush or sandpaper. Previously 
coated surfaces must be sound and in good condition. 
Smooth, hard, or glossy finishes should be scarified by 
sanding to create a surface profile. WARNING! If you 
scrape, sand or remove old paint from any surface, you 
may release lead paint dust. LEAD IS TOXIC. 
EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS 
ILLNESS, SUCH AS BRAIN DAMAGE; ESPECIALLY IN 
CHILDREN. PREGNANT WOMEN SHOULD ALSO 
AVOID EXPOSURE. Wear a NIOSH approved respirator 
to control lead exposure. Clean up carefully with a HEPA 
vacuum and a wet mop. Before you start, find out how to 
protect yourself and your family by contacting the National 
Lead Information Hotline at 1-800-424-LEAD or log on to 
www.epa.gov/lead. 
PRIMING 
Use of a Rust-Oleum
®
 primer provides superior adhesion 
and hiding and is especially recommended for bare wood 
and metal. The following primers are recommended. 
7769  Rusty Metal Primer 
7780  Clean Metal Primer 
2081  Light Gray Auto Primer 
2067  Red Auto Primer 
2089  Dark Gray Auto Primer 



