Specification

TECHNICAL DATA
STOPS RUST VINTAGE METALLIC SPRAYS
Rust-Oleum Corporation Form: GDH-679
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 021015
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company⅗
PHYSICAL PROPERTIES .
VINTAGE METALLIC SPRAYS
Resin Type
Acrylic Modified Alkyd
Pigment Type
Aluminum Flake, Copper Flake and Iron Oxides
Solvents
Acetone, Butyl Acetate, Dimethyl Carbonate, Mineral Spirits
MIR
1.9 Max
Fill Weight
11 ounces
Recommended Dry Film Thickness
(DFT) Per Coat
1.0-2.0 mils
(25-50µ)
Practical Coverage at Recommended
DFT (assumes 15% material loss)
6-8 square feet @ 2 coats
(0.6-0.7 m
2
/coat)
Dry Times at 70-80°F
(21-27°C) and 50%
Relative Humidity
Touch
20 minutes
Handle
4 hours
Recoat
Within 1 hour or after 48 hours
Dry Heat Resistance
200°F (93°C)
Shelf Life
5 years
Flash Point
-156°F (-104°C)
Safety Information
For additional information, see MSDS.
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The statements of this literature
do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use of our materials are beyond our control, we
can guarantee these products only to conform to our standards of quality, and our liability, if any, will be limited to replacement of defective materials. All
technical information is subject to change without notice.