Use and Care Manual

TECHNICAL DATA
ROOF ACCESSORY PAINT
Rust-Oleum Corporation Form: GDH-671
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 012815
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
PHYSICAL PROPERTIES .
ROOF ACCESSORY PAINT
Resin Type
Modified Alkyd Resin
Pigment Type
Varies with color
Solvents
Acetone, Mineral Spirits, VM&P Naphtha, Xylene
MIR
1.00 Max
Fill Weight
12 ounces
Recommended Dry Film Thickness
(DFT) Per Coat
1.0-2.5 mils
(25-62.5µ)
Wet Film to Achieve DFT
Varies depending on porosity and texture of surface
Practical Coverage at Recommended
DFT
10-12 sq.ft./can
(0.9-1.1 m
2
/can)
Dry Times at 70-80°F
(21-27°C) and 50%
Relative Humidity
Touch
20 minutes
Handle
1 hour
Recoat
Within 1 hour or after 48 hours
Dry Heat Resistance
200°F (93°C)
Shelf Life
5 years
Flash Point
-156°F (-104°C)
Safety Information
For additional information, see MSDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The statements of this literature
do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use of our materials are beyond our control, we
can guarantee these products only to conform to our standards of quality, and our liability, if any, will be limited to replacement of defective materials. All
technical information is subject to change without notice.