Use and Care Manual

ManualsBrandsRust-Oleum Stops Rust ManualsPaint12 oz. Clear Satin Protective Enamel Spray Paint

TECHNICAL DATA SRT-01

STOPS RUST

ENAMEL SPRAYS

Form: GDH-678

Rev.: 013015

.DESCRIPTION AND USES .

Rust-Oleum

Stops Rust

Enamel Sprays are designed to

provide a durable protective coating with excellent rust

prevention, and excellent resistance to abrasion, fading, chipping,

and dulling. These sprays apply easily, provide excellent

coverage and dry fast to a tough attractive finish. Rust-Oleum

Stops Rust Enamel Sprays are ideal for ferrous, non-ferrous

metal and wood surfaces. It features a comfort tip with a wider

finger pad to reduce fatigue caused by continuous spraying and

an any-angle tip which allows you to spray at any angle. Not for

use on galvanized metal.

.PRODUCTS .

SKU (Aerosol) Description

7701830 Crystal Clear

7721830 Fresh Blue

7722830 Harbor Blue

7723830 Navy

7724830 Sail Blue

7727830 Royal Blue

7731830 Grass Green

7733830 Dark Hunter Green

7738830 Hunter Green

7747830 Sunburst Yellow

7754830 Anodized Bronze

7762830 Sunrise Red

7763830 Carnival Red

7758830 Regal Red

7768830 Burgundy

7770830 Almond

7771830 Sand

7775830 Leather Brown

7776830 Flat Black

7779830 Gloss Black

7783830 Pewter Gray

7784830 Charcoal Gray

7786830 Smoke Gray

7789830 Canvas White

7790830 Flat White

7792830 Gloss White

7794830 Antique White

7797830 Semi-Gloss White

7798830 Semi-Gloss Black

214084 Orange

214085 Flat Brown

214086 Charleston Green

214087 Army Green

241235 Pistachio

241236 Glacier Blue

245897 Burnt Orange

248567 Merlot

248568 Cherry

248569 Emerald

248630 French Roast

.PRODUCTS (cont.) .

SKU (Aerosol) Description

248631 Night Tide

249032 Khaki

250702 Pure White

250703 Cobblestone

250704 Lobster Red

250705 Fern

262661 Dark Walnut

267112 Kona Brown

269292 Maui Blue

277239 Lagoon

284678 Gloss Light Turquoise

.PAINTING CONDITIONS .

Use outdoors or in a well ventilated area such as an open

garage. Apply when temperature is between 50-90°F (10-

32°C) and humidity is below 65% to ensure proper drying.

Do not apply to surfaces, when heated, exceed 200°F

(93°C). Do not apply to galvanized steel. Avoid spraying in

very windy and dusty conditions. Cover surrounding area

to protect from spray mist.

..PRODUCT APPLICATION .

SURFACE PREPARATION

Remove all dirt, grease, oil, salt and chemical

contaminants by washing the surface with a commercial

detergent, or other suitable cleaning method. Rinse with

fresh water and allow to thoroughly dry. Remove loose

paint and rust with a wire brush or sandpaper. Previously

coated surfaces must be sound and in good condition.

Smooth, hard, or glossy finishes should be scarified by

sanding to create a surface profile.

WARNING! If you scrape, sand or remove old paint from

any surface, you may release lead paint dust. LEAD IS

TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE

SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE;

ESPECIALLY IN CHILDREN. PREGNANT WOMEN

SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH

approved respirator to control lead exposure. Clean up

carefully with a HEPA vacuum and a wet mop. Before you

start, find out how to protect yourself and your family by

contacting the National Lead Information Hotline at 1-800-

424-LEAD or log on to www.epa.gov/lead.

PRIMING

Use of a Rust-Oleum primer provides added corrosion

protection, excellent adhesion and hiding and is especially

recommended for bare wood and metal. The following

primers are recommended.

7769 Rusty Metal Primer

7780 Clean Metal Primer

2081 Light Gray Auto Primer

2067 Red Auto Primer

2089 Dark Gray Auto Primer

Summary of content (3 pages)

PAGE 1
TECHNICAL DATA SRT-01 STOPS RUST ENAMEL SPRAYS .DESCRIPTION AND USES .PRODUCTS (cont.) . SKU (Aerosol) 248631 249032 250702 250703 250704 250705 262661 267112 269292 277239 284678 Rust-Oleum® Stops Rust® Enamel Sprays are designed to provide a durable protective coating with excellent rust prevention, and excellent resistance to abrasion, fading, chipping, and dulling. These sprays apply easily, provide excellent coverage and dry fast to a tough attractive finish.
PAGE 2
TECHNICAL DATA STOPS RUST ENAMEL SPRAYS ..PRODUCT APPLICATION (cont. . . APPLICATION Shake can vigorously for one minute after the mixing ball begins to rattle. If mixing ball fails to rattle DO NOT STRIKE CAN. Contact Rust-Oleum. Shake often during use. Hold can 10-16" from the surface and spray in a steady back-and-forth motion, slightly overlapping each stroke. Keep the can the same distance from the surface. Keep the can in motion while spraying.
PAGE 3
TECHNICAL DATA STOPS RUST ENAMEL SPRAYS PHYSICAL PROPERTIES . ENAMEL SPRAY FINISHES Resin Type Oil modified Alkyd Pigment Type Varies with color Acetone, N-Butyl Acetate, Aromatic Hydrocarbons Solvents 1.4 Max MIR Fill Weight 12 ounces Recommended Dry Film Thickness (DFT) Per Coat 1.0-2.0 mils (25-50µ) Practical Coverage at Recommended DFT (assumes 15% material loss) Dry Times at 70-80°F (21-27°C) and 50% Relative Humidity 10-12 sq.ft./can (0.9-1.