Use and Care Manual

TECHNICAL DATA
LEAKSEAL
TM
FLEXIBLE SEALER
Rust-Oleum Corporation Form: CS2008
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 012313
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
PHYSICAL PROPERTIES .
FINISHES
Resin Type
Hydrocarbon
Solvents
Naphtha and Xylene
MIR
1.20 Max
Fill Weight
15 ounces
Practical Coverage at
Recommended DFT (assumes 15%
material loss)
8.0 sq. ft. (0.74m
2
/can) at 2.5 mils
4.0 sq. ft. (0.37m
2
/can) at 5.0 mils
Dry Times at
70-80°F
(21-27°C) and
50% rel. hum.
Touch
20-30 minutes
Handle
45-60 minutes
Recoat (with itself)
20-30 minutes
Topcoat
24 hours
Shelf Life
2-3 years
Safety
Information
Flash Point -156°F (-104°C)
Warning!
For additional information, see MSDS.
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The statements of this literature
do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use of our materials are beyond our control, we
can guarantee these products only to conform to our standards of quality, and our liability, if any, will be limited to replacement of defective materials. All
technical information is subject to change without notice.