SDS

Date Printed: 10/23/2023
Aluminum Flake 7429-90-5 5.0 1 mg/m3 N.E. 15 mg/m3 N.E.
Ethylbenzene 100-41-4 5.0 20 ppm N.E. 100 ppm N.E.
Carbon Black 1333-86-4 5.0 3 mg/m3 N.E. 3.5 mg/m3 N.E.
1-Methoxy-2-Propyl Acetate 108-65-6 5.0 N.E. N.E. N.E. N.E.
Stoddard Solvent 8052-41-3 5.0 100 ppm N.E. 500 ppm N.E.
Mineral Spirits 64742-88-7 1.0 N.E. N.E. N.E. N.E.
Amorphous Precipitated Silica 112926-00-8 1.0 N.E. N.E. 20 mppcf N.E.
Methyl Ethyl Ketoxime 96-29-7 1.0 10 ppm N.E. N.E. N.E.
Ethylene Glycol Monobutyl
Ether
111-76-2 1.0 20 ppm N.E. 50 ppm N.E.
Distillates (Petroleum),
Hydrodesulfurized Middle
64742-80-9 1.0 N.E. N.E. N.E. N.E.
Benzyl Alcohol 100-51-6 1.0 N.E. N.E. N.E. N.E.
Zirconium 2-Ethylhexanoate 22464-99-9 1.0 5 mg/m3 10 mg/m3 5 mg/m3 N.E.
Cumene 98-82-8 1.0 5 ppm N.E. 50 ppm N.E.
Zirconium Acetate 5153-24-2 0.1 5 mg/m3 10 mg/m3 5 mg/m3 N.E.
PERSONAL PROTECTION
ENGINEERING CONTROLS: Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety
shower. Prevent build-up of vapors by opening all doors and windows to achieve cross-ventilation.
RESPIRATORY PROTECTION: No Information
SKIN PROTECTION: Use impervious gloves to prevent skin contact and absorption of this material through the skin.
EYE PROTECTION: Use safety eyewear designed to protect against splash of liquids.
OTHER PROTECTIVE EQUIPMENT: No Information
HYGIENIC PRACTICES: Wash thoroughly with soap and water before eating, drinking or smoking. Remove contaminated clothing
immediately and launder before reuse.
Engineering Measures for Combustible Dust: No Information
9. Physical and Chemical Properties
Appearance:
Liquid
Physical State:
Liquid
Odor:
Solvent Like N.E.
Odor Threshold:
Specific Gravity:
0.932
pH:
N.A.
Freeze Point, °C:
N.D.
Viscosity:
N.D.
Solubility in Water:
Miscible
Partition Coefficient, n-octanol/
water:
N.D.
Decomposition Temp., °C:
N.D.
Boiling Range, °C:
125 - 196
Explosive Limits, vol%:
0.9 - 7.0
Flammability:
Supports Combustion 23
Flash Point, °C:
Evaporation Rate:
Slower than Ether
Auto-Ignition Temp., °C:
N.D.
Vapor Density:
Heavier than Air
Vapor Pressure:
N.D.
(See "Other information" Section for abbreviation legend)
10. Stability and Reactivity
Conditions to Avoid: Avoid temperatures above 120°F (49°C). Avoid all possible sources of ignition. Flammable hydrogen gas will
evolve when product comes in contact with water or damp air. Heat will be generated. The amount of heat generated will depend
upon the volume of material in contact. Avoid contact with metals. Avoid excess heat.
Incompatibility: Product slowly corrodes copper, aluminum, zinc, and galvanized surfaces. Incompatible with strong oxidizing agents,
strong acids and strong alkalies.
Hazardous Decomposition: No Information
Hazardous Polymerization: No Information
Stability: This product is stable under normal storage conditions.
11. Toxicological Information
EFFECTS OF OVEREXPOSURE - EYE CONTACT: Can cause severe eye irritation. Causes eye burns. Causes eye and skin
irritation which may lead to dermatitis with repeated exposures. Irritating, and may injure eye tissue if not removed promptly. High
vapor concentrations can irritate eyes, nose and respiratory passages.
EFFECTS OF OVEREXPOSURE - SKIN CONTACT: Prolonged or repeated skin contact may cause irritation. Substance is
corrosive. Causes severe skin burns. Causes skin irritation. Allergic reactions are possible. May cause skin sensitization, an
Stops Rust / Hammered Brush-On Paint
Page 4 / 7