Use and Care Manual

TECHNICAL DATA
STOPS RUST
®
DOOR PAINT
Rust-Oleum Corporation Form: GDH-366
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 050914
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company⅗
PHYSICAL PROPERTIES .
DOOR PAINT
Resin Type
Acrylic Modified Alkyd
Pigment Type
Varies with color
Solvents
Aromatic Hydrocarbons
Weight
Per Gallon
8.6-10.6 lbs.
Per Liter
1.03-1.27 kg
Solids
By Weight
51.8-62.9%
By Volume
41.9-46.4%
Volatile Organic Compounds
<500 g/l
(4.20 lbs./gal.)
Recommended Dry Film
Thickness (DFT) Per Coat
1.5-2.5 mils
(37.5-62.5µ)
Wet Film to Achieve DFT
3.5-5.5 mils
(87.5-137.5µ)
Theoretical Coverage at
1 mil DFT (25µ)
168-186 sq.ft./quart
(4.1-4.6 m
2
/l)
Practical Coverage at
Recommended DFT
65-105 sq.ft./quart
(1.5-2.6 m
2
/l)
Dry Times at 70-80°F
(21-27°C) and 50%
Relative Humidity
Touch
1-2 hours
Handle
4-6 hours
Recoat
Within 1 hour or after 24 hours
Dry Heat Resistance
200°F (93°C)
Shelf Life
5 years
Flash Point
87°F (31°C)
Safety Information
For additional information, see MSDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The statements of this literature
do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use of our materials are beyond our control, we
can guarantee these products only to conform to our standards of quality, and our liability, if any, will be limited to replacement of defective materials. All
technical information is subject to change without notice.