Use and Care Manual

TECHNICAL DATA
STOPS RUST TEXTURED SPRAYS
Rust-Oleum Corporation Form: CS2166
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 030113
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company⅗
PHYSICAL PROPERTIES .
TEXTURED SPRAYS
Resin Type
Solvent Acrylic
Pigment Type
Varies with color
MIR
1.4 Max; 1.9 Max (metallic)
Fill Weight
12 ounces
Solvents
Acetone, Toluene, Xylene
Recommended Dry Film
Thickness (DFT) Per Coat
1.0-2.0 mils
(25-50µ)
Practical Coverage at Recommended
DFT (assumes 15% material loss)
10-12 sq. ft./can
(0.9-1.09 m
2
/can)
Dry Times at
70°F (21°C) and
50% Relative
Humidity
Tack-free
15 minutes
Handle
1-2 hours
Recoat
Before 1 hour or after 48 hours
Dry Heat Resistance
200°F (93°C)
Shelf Life
5 years
Flash Point
-156°F (-104°C)
Safety Information
For additional information, see MSDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The statements of this literature
do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use of our materials are beyond our control, we
can guarantee these products only to conform to our standards of quality, and our liability, if any, will be limited to replacement of defective materials. All
technical information is subject to change without notice.