MSDS

mental confusion, and blurred vision) and/or damage. Reports have associated repeated and prolonged
occupational overexposure to solvents with permanent brain and nervous system damage. Overexposure to xylene
in laboratory animals has been associated with liver abnormalities, kidney, lung, spleen, eye and blood damage as
well as reproductive disorders. Effects in humans, due to chronic overexposure, have included liver, cardiac
abnormalities and nervous system damage. Overexposure to toluene in laboratory animals has been associated
with liver abnormalities, kidney, lung and spleen damage. Effects in humans have included liver and cardiac
abnormalities.
Primary Route(s) Of Entry: Skin Contact, Skin Absorption, Inhalation, Eye Contact
First Aid - Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes holding eyelids open.
Get medical attention.
First Aid - Skin Contact: Wash with soap and water. Get medical attention if irritation develops or persists.
First Aid - Inhalation: If you experience difficulty in breathing, leave the area to obtain fresh air. If continued
difficulty is experienced, get medical assistance immediately.
First Aid - Ingestion: Aspiration hazard: Do not induce vomiting or give anything by mouth because this material
can enter the lungs and cause severe lung damage. Get immediate medical attention.
Extinguishing Media: Dry Chemical, Foam, Water Fog
Unusual Fire And Explosion Hazards: Water spray may be ineffective. FLASH POINT IS LESS THAN 20 °. F. -
EXTREMELY FLAMMABLE LIQUID AND VAPOR! Closed containers may explode when exposed to extreme heat.
Vapors may form explosive mixtures with air. Vapors can travel to a source of ignition and flash back. Keep
containers tightly closed. Isolate from heat, electrical equipment, sparks and open flame. Perforation of the
pressurized container may cause bursting of the can.
Special Firefighting Procedures: Evacuate area and fight fire from a safe distance.
Steps To Be Taken If Material Is Released Or Spilled: Contain spilled liquid with sand or earth. DO NOT use
combustible materials such as sawdust. Remove all sources of ignition, ventilate area and remove with inert
absorbent and non-sparking tools. Dispose of according to local, state (provincial) and federal regulations. Do not
incinerate closed containers.
Handling: Follow all MSDS/label precautions even after container is emptied because it may retain product
residues. Avoid breathing vapor or mist. Wash thoroughly after handling. Use only in a well-ventilated area. Wash
hands before eating.
Storage: Keep containers tightly closed. Isolate from heat, electrical equipment, sparks and open flame. Do not
Section 4 - First Aid Measures
Section 5 - Fire Fighting Measures
Flash Point: -156 F LOWER EXPLOSIVE LIMIT: 0.7 %
(
Setaflash)
UPPER EXPLOSIVE LIMIT
:
22.0 %
Section 6 - Accidental Release Measures
Section 7 - Handling And Storage
Page
2
of
6
223525, 223524, 223523, 223526, 239119, 239121, 246333, 246334 Multi Colored Textur
...