Use and Care Manual

TECHNICAL DATA
STOPS RUST
®
RUST REFORMER
Rust-Oleum Corporation Form: GDH-732
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 030415
Vernon Hills, Illinois 60061 www.rustoleum.com
PHYSICAL PROPERTIES .
AEROSOL
BRUSH
Resin Type
Oil modified Alkyd
Acrylic Vinylidine Chloride Copolymer
Appearance
Opaque liquid
Opaque liquid
MIR
1.5 Max
—
Fill Weight
10.25 ounces
—
Weight
Per Gallon
—
10.5 lbs.
Per Liter
—
1.26 kg
Solids
By Weight
—
54.5%
By Volume
—
42.9%
Volatile Organic Compounds
—
<30 g/l (0.24 lbs./gal.)
Recommended Dry Film
Thickness (DFT) Per Coat
1.5-2.5 mils
(37.5-62.5µ)
1.5-2.5 mils
(37.5-62.5µ)
Wet Film to Achieve DFT
—
4.0-6.0 mils
(100-150µ)
Theoretical Coverage at
1 mil DFT (25µ)
—
160 sq.ft./qt.
(15.7 m
2
/l)
Practical Coverage
at Recommended DFT
8-12 sq. ft./can
(0.74-1.10 m
2
)
12-20 sq.ft./8 ounce container
(1.2-2.0 m
2
)
Dry Times at 70-80°F
(21-27°C) and 50%
Relative Humidity
Touch
20-40 minutes
20-40 minutes
Handle
1 hour
1 hour
Recoat
After 24 hours
Oil-based paint: 3 hours
Lacquer or Aerosol: 3 days
Shelf Life
5 years
5 years
Flash Point
-156°F (-104°C)
>200°F (93°C)
Safety Information
For additional information, see MSDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The statements of this literature
do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use of our materials are beyond our control, we
can guarantee these products only to conform to our standards of quality, and our liability, if any, will be limited to replacement of defective materials. All
technical information is subject to change without notice.