Use and Care Manual

TECHNICAL DATA
PEEL STOP –
GLOW IN THE DARK MAX
Rust-Oleum Corporation Form: GDH-314
11 Hawthorn Parkway Phone: [phone] Rev.: 031814
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
.PHYSICAL PROPERTIES .
Physical Properties
GLOW IN THE DARK
Resin Type
Alkyd Resin Polymer
Pigment Type
Phosphorescent Pigment
MIR
1.30 Max
Fill Weight
10 ounces
Solvents
Acetone, N-Butyl Acetate, Xylene, VM&P Naphtha
Practical Coverage at
Recommended DFT (assumes
15% material loss)
8-10 sq.ft./can.
(0.7-0.9 m
2
/can)
Dry Times at
70ºF (21ºC) and
50% Relative
Humidity
Touch
15 minutes
Handle
1-2 hours
Fully Dry
24 hours
Shelf Life
5 years
Flash Point
-156°F (-104°C)
Safety Information
For additional information, see MSDS.
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.