Use and Care Manual

TECHNICAL DATA
PEEL STOP –
GLITTER SPRAYS
Rust-Oleum Corporation Form: CS1893
11 Hawthorn Parkway Phone: 800•481-4785 Rev.: 012114
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
.PHYSICAL PROPERTIES .
Physical Properties
Finishes
Resin Type
Acrylic
Pigment Type
Glitter Flake
MIR
1.20 Max
Fill Weight
10.25 ounces
Solvents
Naphtha, Hexane
Practical Coverage at
Recommended DFT (assumes
15% material loss)
3-5 sq.ft./can (Colors)
6-10 sq.ft./can (Clear)
Dry Times at 77ºF (25ºC) and
50% Relative Humidity
Touch
20 minutes
Handle
1 hour
Recoat
Anytime
Shelf Life
5 years
Flash Point
NA
Safety Information
For additional information, see MSDS.
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.