Use and Care Manual

TECHNICAL DATA
SPECIALTY CHALKBOARD PAINT
Rust-Oleum Corporation Form: GDH-338
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 042914
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
PHYSICAL PROPERTIES .
FLAT BLACK
FLAT GREEN
Resin Type
Acrylic Modified Alkyd
Acrylic Modified Alkyd
Pigment Type
Titanium Dioxide, Nepheline Syenite
Titanium Dioxide, Nepheline Syenite
Solvents
Water, Glycol, Ester Alcohol
Water, Glycol, Ester Alcohol
Weight
Per Gallon
10.8 lbs.
10.8 lbs.
Per Liter
1.29 kg
1.29 kg
Solids
By Weight
54.4%
54.9%
By Volume
41%
41.6%
Volatile Organic Compound
<250 g/l (2.08 lbs./gal.)
<250 g/l (2.08 lbs./gal.)
Recommended Dry Film Thickness
(DFT) per Coat
1.5-2.0 mils
37.5-50µ)
1.5-2.0 mils
37.5-50µ)
Wet Film to Achieve DFT (unthinned
material)
3.5-5.0 mils
(87.5-125µ)
3.5-5.0 mils
(87.5-125µ)
Theoretical Coverage at 1 mil DFT
(25µ)
164 sq.ft./quart
(4.0 m
2
/l)
164 sq.ft./quart
(4.0 m
2
/l)
Practical Coverage at
Recommended DFT (assumes 15%
material loss)
95-120 sq.ft./30 oz.
(based on actual application)
95-120 sq.ft./30 oz.
(based on actual application)
Dry Times at 70-80°F
(21-27°C) and 50%
Relative Humidity
Touch
30 minutes
30 minutes
Handle
2 hours
2 hours
Recoat
4 hours
4 hours
Shelf Life
5 years
5 years
Dry Heat Resistance
NA
NA
Flash Point
>200°F (93°C)
>200°F (93°C)
Safety Information
For additional information, see MSDS.
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The statements of this literature
do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use of our materials are beyond our control, we
can guarantee these products only to conform to our standards of quality, and our liability, if any, will be limited to replacement of defective materials. All
technical information is subject to change without notice.